Completed Project · Cedar Park, TX

Wood Deck Restoration
in Cedar Park, TX

A deck that looked solid from above, but was rotted underneath. We replaced every compromised board, reinforced the substructure, hauled away the old wood, and finished the new pressure-treated decking with a protective coat.

Hidden
Rot under the boards
100%
Compromised boards replaced
3–6
Typical days on site
5 ★
Client rating
Cedar Park TX wood deck restoration — completed project
✓ Full structure inspection
✓ Pressure-treated lumber
✓ Free on-site estimate
✓ Written proposal first
✓ Old wood hauled away
Before & After

The Transformation

Same deck, same footprint: every compromised board replaced and the substructure reinforced. Click any photo to enlarge.

Before
Cedar Park TX wood deck restoration — before
After
Cedar Park TX wood deck restoration — after
Project at a Glance
Service
Wood Deck Restoration
Location
Cedar Park, TX
Deck Type
Wood deck, pressure-treated decking
Problem
Hidden rot and moisture damage
Structure
Substructure inspected and reinforced
Finish
High-quality protective finish

This Cedar Park deck looked stable from above, but many boards were rotted on the underside. After we pulled a few boards for routine replacement we found significant hidden rot and moisture damage, so we inspected the entire structure, replaced every compromised board, reinforced the substructure where needed, hauled away the old wood, and finished the new pressure-treated decking with a protective coat.

The Problem: Rot You Cannot See From Above

Deck boards can look perfectly solid on top while moisture works on the underside. This is one of the most common issues we see across Cedar Park: the surface appears fine, so nobody suspects anything until a board is lifted.

That is exactly what happened here. The job began as a routine replacement of a few boards. Once they were removed, the underside of many planks showed significant rot and moisture damage, which changed the scope from a small repair to a full restoration.

How We Restored It — Stage by Stage

Stage 1

Full Inspection

Instead of replacing only the boards we first saw, we inspected the entire deck structure so the real extent of the damage was known before any new lumber went down.

Stage 2

Remove Compromised Boards

All boards with rot or moisture damage were removed. The old, rotted wood was taken off site and properly hauled away.

Stage 3

Reinforce the Substructure

Where the inspection showed weak spots in the supporting structure, we reinforced it so the new decking would sit on sound framing.

Stage 4

Install New Decking and Finish

New pressure-treated decking was installed and finished with a high-quality protective coating to slow future moisture damage.

The Result

The deck is structurally sound again and no longer hides rot underneath. The takeaway is the same one we give every homeowner: even if your deck looks fine on the surface, underlying issues may be weakening it, and a full inspection during repairs can prevent costly structural problems later.

Project Photos

From the Job Site

Click any photo to open the full-screen gallery and browse the whole project.

Project Video

Watch the Project

See the work from start to finish.

Reviews

What Clients Say

★★★★★

"Kir responded professionally and provided the details about pricing. No hidden fee at all."

Sanding, staining, painting · Board repair · Wood · Residential
Jason N.
November 2024
★★★★★

"Kir was very professional, knowledgeable, and did an excellent job bracing our deck. I will hire him again."

Repair minor cracks, gaps, or holes · Wood
Shannon E.
October 2024
★★★★★

"Kir did a fantastic job repairing our deck. He was prompt, courteous and delivered high quality craftsmanship."

Repair significant wood rot or water damage · Wood · Residential
George S.
November 2024
FAQ

Questions About This Type of Project

How do I know if my deck boards are rotted underneath?
Boards that look solid on top can be rotted on the underside. Warning signs include soft or spongy spots, boards that flex underfoot, dark staining along board edges, and fasteners that no longer hold. The reliable way to check is to lift a few boards and inspect the underside and the framing, which is how the damage was found on this Cedar Park deck.
Why inspect the whole deck when only a few boards look bad?
Moisture damage rarely stays in one place. On this project, routine replacement of a few boards uncovered rot on the underside of many planks. Inspecting the full structure first means the repair is scoped correctly and you are not paying twice for the same deck.
How much does wood deck restoration cost in Cedar Park, TX?
Board replacement combined with refinishing typically runs $1,500 to $4,500 in the Austin area, and the final price depends on how many boards and how much framing are damaged. We give a free on-site estimate and a written proposal before any work begins.
How long does a deck restoration like this take?
Most of our deck repair and restoration projects take 3 to 6 days on site, depending on complexity. Hidden damage found during the work can extend the scope, which is why we assess the structure early.
Do you repair decks in Cedar Park?
Yes. Cedar Park is our home base, and we also repair and restore decks in Austin, Lakeway, Bee Cave, West Lake Hills, and Steiner Ranch.
Get Started

Have a Similar Deck Problem?

Tell us about your deck and we'll get back to you the same day. Free on-site estimate — no obligation.